Open Reduction and Internal Fixation of Radial Head and Neck Fractures



Open Reduction and Internal Fixation of Radial Head and Neck Fractures


Yung Han

George Frederick Hatch III

John M. Itamura





ANATOMY AND BIOMECHANICS



  • The radial head is entirely intra-articular with two articulations: (1) radiocapitellar joint and (2) proximal radioulnar joint (PRUJ).



    • The radiocapitellar joint has a saddle-shaped articulation allowing flexion, extension, and forearm rotation.


    • The PRUJ, constrained by the annular ligament, allows rotation of the radial head in the lesser sigmoid notch of the proximal ulna.



      • To avoid creating a mechanical block to pronation and supination, implants must be limited to a 90-degree arc (the “safe zone”) outside the PRUJ (FIG 1).7






    FIG 1 • The safe zone is a roughly 90-degree arc of the radial head that does not articulate with the ulna in the PRUJ with full supination and pronation. With the wrist in neutral rotation, the safe zone is anterolateral.


  • There is considerable variability in the shape of the radial head, from nearly round to elliptical, as well as variability in the offset of the head from the neck.14


  • Blood supply to the radial head is tenuous with a major contribution from a single branch of the radial recurrent artery in the safe zone and minor contributions from both the radial and interosseous recurrent arteries which penetrate the capsule at its insertion into the neck (FIG 2).26


  • The anterior band of the medial collateral ligament (MCL) is the primary stabilizer to valgus stress. The radial head, a secondary stabilizer, maintains up to 30% of valgus resistance in the native elbow. Therefore, in cases where the MCL is ruptured:



    • A radial head that is not reparable should be replaced with a prosthesis and not excised given its biomechanical importance.


    • It may be prudent to protect a repaired radial head from high valgus stress during early range of motion.


  • The radial head also functions in the transmission of axial load, transmitting 60% of the load from the wrist to the elbow.21 This is a crucial consideration when the interosseous membrane is disrupted in the Essex-Lopresti lesion.9 Resection of the radial head in this setting results in devastating longitudinal radioulnar instability, proximal migration of the radius, and possible ulnar-carpal impingement.







FIG 2A. The radial recurrent artery, a branch of the radial artery, provides the main blood supply to the radial head. B. In most cadaveric specimens, a branch of the radial recurrent penetrates the radial head in the safe zone. (From Yamaguchi K, Sweet FA, Bindra R, et al. The extraosseous and intraosseous arterial anatomy of the adult elbow. J Bone Joint Surg Am 1997;79[11]:1653-1662.)


PATHOGENESIS



  • Radial head fractures result from trauma. A fall on an outstretched hand with the elbow in extension and the forearm in pronation produces an axial or valgus load (or both) driving the radial head into the capitellum, fracturing the relatively osteopenic radial head.2






    FIG 3 • Soft tissue injuries occur with unstable radial head fractures. Sample pictures showing (A) large capsular rupture and (B) avulsion of the lateral collateral ligament (LCL) and common extensor tendons from the lateral epicondyle.


  • Nondisplaced or minimally displaced injuries do not usually have associated injuries. However, displaced, comminuted, or unstable fractures have a high association of soft tissue injuries (FIG 3) that can lead to considerable complications, including pain, arthrosis, instability, and disability:



    • Capitellar cartilage defects, capitellar bone bruises, and/or posterior dislocation can occur with radial head fractures.


  • Axial loading may also rupture the interosseous membrane causing longitudinal radioulnar instability with dislocation of the distal radioulnar joint (DRUJ) (Essex-Lopresti fracture). An impacted radial neck or depressed radial head fracture should be highly suspicious of a concomitant interosseous membrane and DRUJ injury (FIG 4).


  • The “terrible triad” injury results from valgus loading of the elbow, disrupting the MCL or lateral ulnar collateral ligament, and fracturing the radial head and coronoid process.


  • Radial head fractures can also occur with proximal ulnar fractures (Monteggia fracture) (FIG 5).






FIG 4 • AP x-ray showing a depressed articular fracture with impaction at the radial neck. This fracture pattern is highly suspicious for an Essex-Lopresti fracture. Radial head replacement is recommended. If ORIF is performed, the DRUJ should be stabilized to prevent instability.







FIG 5A,B. AP and lateral x-ray showing a type II Monteggia fracture—posterior dislocation of radial head (or fracture) and proximal ulnar fracture with posterior angulation. C. CT scan clearly showing impaction fracture of the radial head that may not be appreciable on x-ray.


NATURAL HISTORY



  • The original Mason classification was modified by Johnson, and then Morrey. Hotchkiss proposed that the classification system be used to provide guidance for treatment. It has poor intraobserver and interobserver reliability (FIG 6).9


Type I Fractures



  • Nondisplaced and offer no block to pronation and supination on examination


  • Represents approximately 82% of radial head fractures18


  • Nonoperative treatment generally results in good to excellent outcomes with minimal loss of motion or resultant arthrosis.1, 3, 8, 12


  • Stiffness due to capsular contracture is the main reason for a poor outcome; however, it can often be managed successfully with physical therapy.


Type II Fractures



  • Displaced marginal segments that can block normal forearm rotation. According to Broberg and Morrey,6 the fragment should be greater than or equal to 30% of the articular surface and be displaced greater than or equal to 2 mm. We only include fractures with three or fewer articular fragments, which meet criteria for fractures that can be operatively reduced and fixed with reproducibly good results.






    FIG 6 • The modified Mason classification for radial head fractures.


  • Represents approximately 14% of radial head fractures18


  • Earlier studies suggested nonoperative treatment or radial head excision as the standard treatment,13, 19, 20, 23 but as knowledge and technology advanced, optimal treatment has become more controversial.


  • Greater than 2 mm of displacement has often been cited as an indication for ORIF, but good results have been obtained in studies treating 2 to 5 mm of displacement nonoperatively.1, 12


  • A mechanical block is the only clear indication for surgery.


  • A recent meta-analysis16 found successful nonoperative treatment in 80% compared to successful ORIF treatment in 93% for stable Mason type II fractures; however, the authors concluded that there was insufficient evidence to recommend optimal treatment.


  • Complications from nonoperative treatment such as painful clicking, nonunion, and arthrosis can be treated with radial head excision or arthroplasty; however, it is considered with modest increase in function. It has shown 23% fair or poor results at 15 years of follow-up.5



  • Delayed excision of the radial head after failed nonoperative management may be considered with modest increase in function; it has shown 23% fair or poor results at 15 years of follow-up.5 Other studies suggested that there is no difference between delayed and primary excision.11


Type III Fractures

Jul 22, 2016 | Posted by in ORTHOPEDIC | Comments Off on Open Reduction and Internal Fixation of Radial Head and Neck Fractures

Full access? Get Clinical Tree

Get Clinical Tree app for offline access