Intramedullary Nailing of the Mature Tibia



Intramedullary Nailing of the Mature Tibia


Mark A. Lee

Jonathan G. Eastman

Brett Crist





ANATOMY



  • The triangular-shaped proximal tibia is narrowest medially, and the proximal medial cortex tibia is obliquely oriented to the frontal plane. The medullary canal of the tibia exits at the margin of the lateral articular facet. As a result of this complex proximal anatomy, there is less sagittal plane space for an intramedullary nail within the tibia metaphysis with a medial or central insertion path. With a medial start site, the anteromedial metaphyseal cortex can deflect the nail and create a valgus deformation. Due to these factors, a tendency toward a more lateral start site is favored.


  • The patellar tendon inserts on the tibial tubercle and extends the proximal fracture segment in proximal fracture patterns. This displacement is accentuated with further flexion of the knee, which typically is required to attain the proper starting point for intramedullary nailing (FIG 1A).


  • Gerdy tubercle—the origin of the anterior compartment muscles and insertion site of the iliotibial band—is palpable along the proximal lateral tibia. In addition to the deforming forces of the patellar tendon, the anterior compartment muscles and the iliotibial band contribute to the shortening and valgus deformity typically seen with more proximal fractures.


  • The anterior tibial crest corresponds to the vertical lateral surface of the tibia. When it is palpable, it is an excellent reference for the anatomic axis and nail path (FIG 1B).


  • The anteromedial tibial surface is subcutaneous and often is the site of traumatic open wounds.


  • The anterior neurovascular bundle and tibialis anterior tendon are at risk with anterior to posterior distal interlocking screw paths; internal rotation of the nail may decrease the risk of iatrogenic nerve injury3 (FIG 1C).


  • The Hoffa fat pad and intermeniscal ligament are commonly injured during all tibial intramedullary nail insertion techniques, especially during lateral parapatellar and patellar tendon-splitting approaches.27, 34


PATHOGENESIS



  • Tibial shaft fractures may occur from high-energy mechanisms of injury, as when a pedestrian is struck by a motor vehicle. Many fractures, however, result from low-energy mechanisms such as simple falls in elderly patients or those with poor bone quality or sports-related injuries (common in soccer players) in younger patients.6


  • In this low-energy fracture group, elderly patients are more likely to have comminuted and open fractures due to simple falls.


NATURAL HISTORY



  • The long-term outcome of tibial malunion is not clearly defined in the trauma literature.



    • A weak association is seen between a tibial shaft fracture malunion and ipsilateral knee and ankle arthritis.12, 19, 32


  • Knee pain is reported in up to 58% of cases after intramedullary nailing. This pain typically is anterior, associated with activity, and exacerbated by kneeling activities.6, 11



    • Knee pain improves in about 50% of patients after hardware removal.6


    • Attempts to detect a correlation between start sites and knee pain have been inconclusive, and comparative evaluations between traditional start sites and semiextended start sites (ie, suprapatellar) are underway.


PATIENT HISTORY AND PHYSICAL FINDINGS



  • Understanding the mechanism of injury and the environment in which the injury occurred is important for evaluating a patient’s risk for associated injuries and compartment syndrome. In open fractures, it can help determine the choice of prophylactic antibiotic therapy.


  • All patients who sustain tibial shaft fractures from high-energy mechanisms should undergo standard advanced trauma and life support (ATLS) protocol to have a thorough examination for life- and other limb-threatening injuries. Seventy-five percent of patients with open tibia fractures have associated injuries.1


  • To evaluate a patient’s risk for potential complications, other medical conditions should be investigated, including a history of diabetes mellitus, renal disease, inflammatory arthropathies, tobacco use (which increases healing time by up to 40%), and peripheral vascular disease.4


  • It also is important to find out about the patient’s normal activities and employment requirements to give them a reasonable expectation for when they will be able to resume those activities.


  • Pain at the fracture site, swelling, and deformity are common findings in patients with tibial shaft fractures.


  • A thorough examination of the skin is important to avoid missing open fracture wounds.


  • Evaluation of the soft tissue envelope for abrasions, contusions, and fracture blisters can help determine whether
    definitive treatment can be done primarily or if a staged or delayed approach is required.






    FIG 1A. The metaphyseal segment extends with knee flexion secondary to the pull of the patellar tendon. B. The anterior tibial crest is palpable and represents the vertical lateral border of the tibia. Palpation of the crest can help aid in starting wire orientation. C. Anterior neurovascular structures are at risk during anterior placement of distal interlocking bolts; internal rotation may decrease the risk of arterial injury.


  • A detailed neurovascular examination is critical to avoid the devastating complications associated with compartment syndrome, which can occur in both closed and open fractures (see Chap. 38).


IMAGING AND OTHER DIAGNOSTIC STUDIES



  • Full-length anteroposterior (AP) and lateral plain radiographs are necessary to adequately evaluate the tibia and fibula. Complete orthogonal views of the tibia and fibula help evaluate for concurrent fractures or dislocation and any preexisting deformity or implants.



    • Orthogonal radiographic views of the knee and ankle are required to rule out articular involvement.


  • Axial computed tomography (CT) scan can be used for proximal and distal fractures to rule out intra-articular fracture extension.



    • Nondisplaced fracture lines are common.


    • Gunshot wounds may merit CT evaluation to rule out intra-articular bullet fragments and intra-articular fracture extension.


  • Magnetic resonance imaging (MRI) is not useful for most diaphyseal or metadiaphyseal fractures.


  • Ankle-brachial index (systolic pressure in injured leg below injury divided by systolic pressure of the brachium) after fracture reduction should be used to rule out vascular injuries in severely displaced fractures or fractures with severe soft tissue injury. Values of less than 0.9 may be indicative of vascular injury, requiring further investigation.18



  • Compartment pressure evaluation with a commercially available handheld single-stick monitor or with a side-ported catheter connected to a pressure monitor (using the arterial line setup) is indicated in patients who have severe or increasing swelling and are not able to comply with physical examination and questioning.



    • Observe for early signs of compartment syndrome in all patients with tibial diaphyseal fractures.


    • Open fracture does not preclude development of compartment syndrome.


    • Measure the pressure difference between the diastolic pressure and the intracompartmental pressure—a differential value of less than 30 mm Hg is considered an indication for a four-compartment fasciotomy.17


NONOPERATIVE MANAGEMENT



  • Nonoperative management is indicated in ambulatory patients for closed and open fractures that do not require flap coverage and that do not present with excessive initial shortening or unacceptable angulation when a cast is applied (FIG 2).


  • An intact fibula with an axially unstable fracture pattern (ie, short oblique, butterfly fragment, or comminuted) is at risk for shortening and varus deformities and is a relative contraindication to nonoperative management.


  • A higher rate of malunion and nonunion with nonoperative management is seen in higher energy fractures.2, 9


  • Joint stiffness, especially hindfoot, is common with all forms of prolonged immobilization.7, 22


  • Initial treatment includes ˜2 weeks of a long-leg splint, then a long-leg cast for 2 to 4 weeks.



    • When the initial swelling has subsided, the patient is graduated to a patellar tendon or functional brace. Weight bearing is allowed and encouraged.






      FIG 2A-C. An oblique diaphyseal tibial shaft fracture treated nonoperatively to union. (Courtesy of Paul Tornetta III, MD.)


    • Radiographs are evaluated at 1- to 2-week intervals over the first month of treatment to confirm maintenance of acceptable alignment.


SURGICAL MANAGEMENT



Positioning



  • Supine positioning is standard.


  • A fracture table can be used with boot traction, calcaneal traction, or an arthroscopy leg holder that supports the leg and provides mechanical traction when no assistants are available. However, knee hyperflexion is difficult, and the guidewire insertion angle is suboptimal for proximal fractures16 (FIG 3A).


  • The patient is placed on the radiolucent table in one of the following positions:



    • Supine with the leg free (FIG 3B)



      • Mechanical traction is helpful to achieve reduction when the leg is draped free (FIG 3C,D).


      • The proximal posterior Schanz pin (FIG 3E) is inserted medial to lateral and parallel to the tibial plateau.


      • The distal Schanz pin (FIG 3F) is inserted parallel to the plafond and inferior to the projected end of the nail.


    • Supine with the leg flexed over a bolster or radiolucent triangle (FIG 3G)



      • Maximizing knee flexion makes it easier to attain a start site and to obtain an optimal insertion vector, which approaches a parallel path with the anterior tibial border.






      FIG 3A. The fractured leg is positioned in calcaneal skeletal traction on the fracture table. This provides excellent mechanical traction but limits limb mobility, especially knee flexion. B. The knee is flexed over a positioning triangle in preparation for the surgical approach. C,D. The tibial fracture is distracted and reduced using a mechanical distraction device with proximal and distal half-pins. (continued)







      FIG 3(continued) E. A posteriorly positioned half-pin can be placed behind the projected nail path. F. A distal half-pin placed just over and parallel to the plafond can be helpful for aligning the distal fragment and lies inferior to the projected end of the nail. G. The knee is maximally flexed over the triangle to allow for the proper starting wire insertion angle. H. Typical setup for semiextended nailing with a small bolster for limited knee flexion and easy access to the limb for reduction and imaging.


    • Semiextended position



      • For proximal fractures, extending the knee to 20 to 30 degrees of flexion counters the pull of the patellar tendon and helps reduce the flexion deformity that is typical for these fractures.26 Either a radiolucent triangle or bolster can be used (FIG 3H).


Approach

Jul 22, 2016 | Posted by in ORTHOPEDIC | Comments Off on Intramedullary Nailing of the Mature Tibia

Full access? Get Clinical Tree

Get Clinical Tree app for offline access