Roles of fascia in molecular biology of adaptation of muscle size

8.4


Roles of fascia in molecular biology of adaptation of muscle size




Introduction


Skeletal muscle is able to adapt its properties in response to changes in functional demands because of its ability to activate and deactivate molecular systems for protein synthesis and degradation. Adequate functioning of these systems is particularly important in cases of muscle injury, neurological disorders, or chronic diseases associated with loss of muscle mass. With disuse, atrophy is a common adaptation limiting the capability to generate force. Optimizing intervention effects aimed at redressing this requires knowledge of the underlying mechanisms.


Mechanical loading of muscle tissue is a critical stimulus for adaptation of myofiber size. Knowledge of how mechanical loading of the muscle–tendon complex affects the mechanical and molecular environments of myofibers is essential for optimizing the therapeutic treatment of patients with complaints in the muscle-fascia unit. This chapter considers how mechanical loading of this complex activates molecular processes and how fasciae play a role in muscle regeneration and adaptation of muscle size.



Mechanical loading-induced muscle adaptation in vivo


The active force a muscle is able to exert at different lengths depends on the number of sarcomeres arranged in series (within myofibers) and in parallel (within the muscle). The more sarcomeres in series (i.e., longer optimum fiber length), the higher is the length range of active force exertion. However, this has no effect on the maximum force a myofiber can exert (at its optimum length). Therefore, optimal muscle force is determined by both the number of the myofibers and the number and size of myofibrils arranged in parallel within myofibers. The muscle cross-sectional area (Af) perpendicular to the fiber direction at a standardized mean sarcomere length (e.g., optimum length) provides an estimate of the maximum force a muscle is able to exert.


Both prime parameters, Af and serial sarcomere number, are highly adaptable in response to changes in mechanical loading of muscle. In myology, for adaptation of Af the terms atrophy and hypertrophy are used specifically, whereas adaptation of the serial sarcomere number refers to changes along the myofiber.


How does mechanical loading stimulate adaptation of muscle size? Several in-vivo experiments indicate that mechanical loading-induced adaptation of muscle size is determined by both type and intensity of active contractile activity, as well as the strain applied onto the muscle.



Training


Training studies have shown that high intensity training, particularly consisting of eccentric contractions, most strongly stimulates muscle hypertrophy (Farthing & Chilibeck 2003). In contrast, disuse of muscle as occurs in low gravity conditions or limb suspension causes progressive and severe atrophy (Huijing & Jaspers 2005). Effects of these types of muscle overload and disuse on muscle remain unreported.



Muscle strain


Muscles also adapt their size in response to the length at which they are maintained. Experiments in which rodent muscles were immobilized at high lengths, for periods varying from several days to 4 weeks, have shown a 20% hypertrophy and a 15% increase in the number of sarcomeres in series (Williams & Goldspink 1978). This was arranged in such a way that the optimum length of the adapted muscle was attained at the immobilized position. Opposite effects have been reported for muscles which were immobilized in a maximally shortened position: yielding 30–40% atrophy as well as a similar reduction in serial sarcomere numbers (particularly low degree pennate muscle) (Williams & Goldspink 1978; Heslinga & Huijing 1993). Also for this condition, optimal force was reduced substantially and optimum length was attained at the immobilized position (Williams & Goldspink 1978; Heslinga et al. 1995).


From these results, a simple rule has been derived stating that for any muscle adaptation of Af and serial sarcomere number is regulated in such a way that muscle optimum length is attained at the joint angle at which a muscle is most frequently active (Herring et al. 1984). Although the simple rule seems to be valid for several types of muscles and species, controversies and exceptions do exist. It has been suggested that, for some muscles, the length ranges of operation in daily activities differ from those predicted by the simple rule that muscles are operating around their optimum length (Burkholder & Lieber 2001).


Other evidence suggesting that high actual myofiber strain per se does not stimulate hypertrophy and increase of serial sarcomere number is derived from ex-vivo cultures of mature myofibers (see below). This indicates the need for more detailed understanding of mechanisms via which mechanical loading affects the rate of protein synthesis and degradation.



Molecular mechanisms of adaptation of muscle size


The quantity of proteins constituting force generating or passive elements within a myofiber is the net result of ongoing processes of simultaneous protein synthesis and degradation, both being modulated in response to mechanical loading.


Protein synthesis involves three types of processes occurring in subsequent order.



Machinery for protein synthesis



Transcription of the deoxyribonucleic acid (DNA) of the genome


The genetic code itself resides within DNA strings located within the nuclei of the myofiber, but DNA is never applied directly in the synthesis of proteins. First, DNA is “transcribed” (copied) into messenger ribonucleic acid (mRNA) that carries “the recipe” from the DNA. This process is referred to as “transcription”. The rate of protein synthesis depends on the quantity of DNA available, as well as on the rate of transcription. Most cells have only one nucleus, which means that the quantity of DNA cannot be regulated. Myofibers contain a large pool of nuclei. In adaptation, this pool may be enlarged or reduced by proliferation satellite cells (i.e., muscle stem cells resident between the sarcolemma and the basal lamina) which donate additional nuclei to the myofiber or remove nuclei (i.e., DNA degradation), respectively.


The rate of transcription is determined by the absence or presence of transcription factors that modify DNA molecules such that transcription of genes is facilitated or inhibited.






Mechanochemical signaling and mechanotransduction for protein synthesis and degradation in muscle


Given balanced protein synthesis and degradation, hypertrophy and addition of serial sarcomeres requires either raising protein synthesis rates, or inhibiting degradation rates, or both. This means that mechanical loading triggers intracellular signaling pathways affecting the processes mentioned. To accomplish this, the mechanical load must be sensed and transmitted to the machineries for protein synthesis and degradation.


Myofibers are equipped with sensors via which protein synthesis and degradation are directly and/or indirectly affected (Fig. 8.4.1). Several types of mechanosensor are known: (1) stretch activated calcium channels within the sarcolemma that open as myofibers are stretched, allowing the influx of calcium into the cytoplasm. Other transmembrane-receptors such as (2) the integrin and (3) dystroglycan complexes connect the intracellular cytoskeleton to the extracellular matrix (ECM) that is reinforced by collagen structures within the basal lamina and endomysium. Mechanical loading of such receptors and channels activates enzymes associated with sarcolemma that subsequently elicit cascades of chemical reactions. This mechanochemical signal transduction stimulates muscle gene expression and/or rates of translation (Huijing & Jaspers 2005). Signaling via these receptors and channels is associated also with increased expression of growth factors that are secreted into the extracellular matrix. These factors act on myofibers in which they are produced (autocrine signaling) or on neighbouring myofibers and other cells (paracrine signaling). Among many growth factors expressed in muscle, the following play important roles in adaptation of muscle size: (1) insulin-like growth factor 1 (IGF-1), (2) mechano-growth factor (MGF), (3) basic fibroblast growth factors (bFGF), (4) hepatocyte growth factor (HGF), and (5) myostatin. On overloading muscle in vivo, mRNA expression of these growth factors is increased (Huijing & Jaspers 2005), with the notable exception of myostatin (reduced expression; Heinemeier et al. 2007). Most of these growth factors also play a role in activating satellite cells. Satellite cells are normally quiescent, but exposure to MGF, FGF or HGF initiates proliferation by cell division (Huijing & Jaspers 2005). In contrast, myostatin inhibits satellite cell proliferation (Huijing & Jaspers 2005). Activation of satellite cells is important for two reasons: (1) for repair of overload-induced myofiber damage, activation of satellite cells will provide new nuclei to replace degraded ones within the damaged myofiber parts; and (2) the number of nuclei within a myofiber may be the factor limiting the maximal capacity for mRNA transcription (Huijing & Jaspers 2005). However, some hypertrophy and addition of sarcomeres due to enhanced transcription and/or translation is possible without adding new nuclei (Petrella et al. 2008).



image


Fig. 8.4.1 • Schematic representation of the mechanochemical signaling pathways involved in the regulation of myofiber size.
Two adjacent myofibers are shown, which are surrounded by their sarcolemma (SL) and a basal lamina (BL). The muscle fibers are anchored to the collagen fiber reinforced extracellular matrix by the integrin and dystroglycan/sarcoglycan complexes. Mechanical loading is sensed at these complexes at the myotendinous junctions of the myofibers as well as along the length of the myofiber. Loading of these complexes elicits cascades of signaling molecules (i.e., free radicals and enzymes). Another mechanosensor is the stretch activated calcium (Ca2+) channel, which allows calcium influx into sarcoplasm. In addition to its role in the contraction, calcium also regulates the activity of particular transcription factors. Transcription factors may alter deoxyribonucleic acid in the myonucleus (MN) and affect the synthesis of muscular proteins directly or indirectly via expression of growth factors, which are released in the interstitial space (i.e., extracellular matrix). Several growth factors have been identified to be expressed within muscle, which likely play a major role in muscle adaptation. Among these are the insulin-like growth factor 1 (IGF-1), mechanogrowth factor (MGF), fibroblast growth factor (FGF), hepatocyte growth factor (HGF) and myostatin. Once released, these growth factors can bind to receptors in the membrane of the producing myofiber and stimulate signaling pathways that modulate the rate of transcription of DNA as well as the rate at which the ribosomal RNA (constituting the body of the ribosome) translates the mRNA into protein. The growth factors may bind to receptors in the membrane of the fiber that releases these factors as well as of its host satellite cells (SC), neighboring myofibers and/or other cells such as fibroblasts and adipocytes.

Stay updated, free articles. Join our Telegram channel

Aug 24, 2016 | Posted by in ORTHOPEDIC | Comments Off on Roles of fascia in molecular biology of adaptation of muscle size

Full access? Get Clinical Tree

Get Clinical Tree app for offline access